Southern Regional Technical College

Accounting

The Accounting Diploma program is a sequence of courses that prepares students for a variety of entry- level accounting positions in today's technology- driven workplaces. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. Program graduates receive an Accounting Diploma.

Accounting

The Accounting Associate Degree program is a sequence of courses that prepares students for a variety of accounting careers in today's technology- driven workplaces. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. Program graduates receive an Associate of Applied Science Degree in Accounting.

Administrative Support Assistant

The Administrative Support Assistant program prepares individuals to provide administrative support under the supervision of office managers, executive assistants, and other office personnel. Courses include: Introduction to microcomputers, word processing, and office procedures.

Advanced Cad Technician

The Advanced CAD Technician certificate program provides students with specific skills necessary to produce architectural drawings and designs. Students utilize Computer Aided Drafting hardware and software to design and create working drawings for residential and commercial structures. Students also receive instruction in mechanical systems for architecture to further enhance their knowledge of building and construction practices in the architectural field.

Advanced Child Development Specialist

The Advanced Child Development Specialist Technical Certificate of Credit is a sequence of seven courses designed to prepare students for a variety of careers in the field of early childhood education. This technical certificate will allow area high school students to complete the third course in the Early Childhood Care and Education Pathway. The program also emphasizes brain development, integrating appropriate technology, early learning, and parenting and child guidance trends.

Advertising Layout Specialist

The Advertising Layout Specialist TCC provides entry- level training in advertising layout with courses in identity design, page layout, advertising and promotional design. Students will have the opportunity to choose from electives in advertising, photography and commercial photography. Additionally, the program provides opportunities to upgrade present knowledge or skills.

Air Conditioning Electrical Technician

Heating, air conditioning, and refrigeration mechanics and installers held about 308,200 jobs in 2008; about 54% worked for plumbing, heating, and air conditioning contractors. The rest were employed in a variety of industries throughout the country, reflecting, a widespread dependence on climate-control systems. Some worked for refrigeration and air conditioning service and repair shops, schools, and stores that see heating, and air conditioning systems.

Air Conditioning Repair Specialist

The Air Conditioning Repair Specialist Technical Certificate of Credit is a series of courses designed to prepare students for positions in the maintenance and repair of air conditioning systems. A combination of theory and practical application provide for the necessary skills to support industry requirements.

Air Conditioning System Maintenance Technician

The Air Conditioning System Maintenance Technician certificate program is a series of courses designed to prepare students for entry level positions in the HVACR industry. Topics include refrigeration fundamentals, refrigeration principles and practices, electrical fundamentals, and industrial safety procedures.

Air Conditioning Technician Assistant

The Refrigeration Technician Assistant TCC is a series of courses that prepares students to hold positions as refrigeration technician assistants.

Air Conditioning Technology

The Air Conditioning Technology Diploma program is a sequence of courses that prepares students for careers in the air conditioning industry. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of air conditioning theory and practical application necessary for successful employment.

Allied Health Professions (Medical Assisting Track)

The Associate of Applied Science Degree in Allied Health Professions (AHP) offers flexibility in tailoring the curriculum to suit the individual academic and career objectives of each student. This program entails the completion of 65 semester credit hours, comprising 15 hours of general education requirements and 50 hours allocated to healthcare-related occupation courses.

Allied Health Professions (Practical Nursing Track)

The Associate of Applied Science Degree in Allied Health Professions (AHP) offers flexibility in tailoring the curriculum to suit the individual academic and career objectives of each student. This program entails the completion of a range between 61-64 semester credit hours, comprising 15 hours of general education requirements and 49 hours allocated to healthcare- related occupation courses.

Applied Technical Management

The AAS in Applied Technical Management allows a student to complete a Diploma in a TCSG program area and to continue to this AAS. In addition to the skills and knowledge obtained in the Diploma, the student will obtain degree-level general education knowledge and business related skills and knowledge.

Auto Collision Repair

The Automotive Collision Repair Diploma program is a sequence of courses designed to prepare students for careers in the automotive collision repair profession. Learning opportunities develop academic, technical and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes either major automotive collision repair or automotive painting and refinishing depending on the specialization area a student chooses to complete.

Auto Maintenance And Light Repair Tech

The Auto Maintenance and Light Repair TCC prepares students for entry level maintenance and repair positions in auto service shops. Students will learn the basic repair and maintenance operations in all eight ASE areas of passenger vehicles and light trucks. Graduates of this TCC will be able to pursue master level auto knowledge in the auto technology diploma or degree programs.

Automation Technology

The Automation Technology Diploma program is designed for the student who wishes to prepare for a career as an Industrial Systems technician/electrician. The program provides learning opportunities that introduce, develop and reinforce academic and technical knowledge, skill, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skill.

Automation Technology

The Automation Technology Degree program is designed for the student who wishes to prepare for a career as an Automation technician/electrician. The program provides learning opportunities that introduce, develop and reinforce academic and technical knowledge, skill, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skill.

Automotive Chassis Technician Specialist

The Automotive Chassis Technician Specialist Technical Certificate of Credit provides students with skills needed to enter the automotive industry as an entry level chassis technician. Topics covered include: shop safety, basic electrical/electronic theory and diagnosis, chassis components and types, steering system components and service, alignment theory and procedures, and brake system operation, diagnosis and repair.

Automotive Climate Control Technician

The Automotive Climate Control Technician Technical Certificate of Credit provides students with skills for entering the automotive service industry as an entry level climate control technician. Topics covered include: basic shop safety, electrical/electronic theory and diagnosis, and the theory, operation, diagnosis and servicing of automotive climate control systems.

Automotive Collision Repair Assistant I

The Automotive Collision Repair Assistant I Technical Certificate of Credit prepares students for employment as assistants to lead and master technicians in an automotive collision repair shop. Topics covered include work safety, hand and power tools, basic component replacement, automotive welding techniques, and mechanical and electrical systems.

Automotive Engine Performance Technician

The Automotive Engine Performance Technician Technical Certificate of Credit introduces students to the knowledge and skills they will need as entry level automotive engine performance technicians. Topics covered include: shop safety, electrical/electronic diagnosis, and diagnosis and service of fuel, ignition, emission and electronic engine controls.

Automotive Fundamentals

The Automotive Fundamentals Diploma program is a sequence of courses designed to prepare students for careers in the automotive service and repair profession. Learning opportunities enable students to develop academic, technical and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of automotive mechanics theory and practical application necessary for successful employment.

Automotive Refinishing Assistant I

The Automotive Refinishing Assistant I Technical Certificate of Credit prepares students for employment as assistants to lead and master technicians in an automotive collision repair shop. Topics covered include: work safety, hand and power tools, basic component repair and replacement, and trim accessories and glass replacements.

Automotive Refinishing Assistant II

The Automotive Refinishing Assistant II Technical Certificate of Credit is an advanced certificate option for students who complete the Automotive Refinishing Assistant I program. This program is designed to produce graduates who are entry level paint and refinishing specialists. Topics include: surface preparation, paint identification, spray gun equipment, spray gun techniques, blending, and tinting and matching colors.

Barbering Assistant I

The Barbering Assistant I technical certificate of credit introduces courses that prepare students for careers in the field of Barbering. Graduates are employable as a Barbering Apprentices within barber shops. This program will also enable students to enroll into the Barber II technical certificate or Barbering diploma and complete the requirements for their state license.

Basic Jail/Detention Officer

The Basic Detention/Jailer Certificate program is designed to prepare students for careers in detention and corrections, specifically as Basic Jail/Detention Officers. These professionals are responsible for maintaining security within correctional facilities, ensuring the safety and welfare of incarcerated individuals, and upholding institutional policies and procedures. Their duties include inmate supervision, intake processing, emergency response, and conflict resolution.

Basic Machining Operator

The Basic Machining Operator certificate prepares students for entry level machine shop employment by providing the knowledge and skills in basic machining operations. Instruction is provided in blueprint reading, lathe, mill, and surface grinder operation, mathematical functions, and an introduction to the machine tool industry.

Basic Machinist

The Basic Machinist certificate program prepares students for a machine tool operator position with a machine shop or machine tool establishment. Topics include foundations of mathematics, an introduction to machine tool technology, and blueprint reading for machine tool applications.

Basic Shielded Metal Arc Welder

The Basic Shielded Metal Arc Welder Technical Certificate of Credit prepares students for careers in the welding and joining industry. This certificate emphasizes arc welding in the flat position and is pre- requisite to the advanced certificate.

Business Healthcare Technology

The Business Healthcare Technology program is designed to prepare graduates for employment in a variety of positions in today's technology-driven workplaces. The Business Healthcare Technology program provides learning opportunities, which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. The program emphasizes the use of software and technology.

Business Healthcare Technology

The Business Healthcare Technology program is designed to prepare graduates for employment in a variety of positions in today's technology-driven workplaces. The Business Healthcare Technology program provides learning opportunities, which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. The program emphasizes the use of software and technology.

Business Management

The Business Management program prepares experienced workers for entry into management or supervisory positions within a wide variety of businesses and industries. The Business Management program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement.

Business Management

The Business Management program is designed to prepare students for entry into management and supervisory positions within a wide variety of businesses and industries. Learning opportunities will introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement in management.

Business Technology

The Business Technology program is designed to prepare graduates for employment in a variety of positions in today's technology-driven workplaces. The program provides learning opportunities, which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. The program emphasizes the use of word processing, spreadsheet, presentation, and database applications software.

Business Technology

The Business Technology program is designed to prepare graduates for employment in a variety of positions in today's technology-driven workplaces. The program provides learning opportunities, which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. The program emphasizes the use of word processing, spreadsheet, presentation, and database applications software.

Cabinetmaking

The Cabinetmaking program is a sequence of courses that prepares students for careers in cabinetmaking and related fields. Learning opportunities develop academic, technical and professional knowledge and skills required for job acquisitions, retention and advancement. The program emphasizes a combination of cabinetmaking theory and practical application necessary for successful employment. Program graduates receive a diploma and have the qualification of cabinetmaker.

Cad Operator

All of the courses in the CAD Operator TCC program are embedded in the Drafting Technology diploma and degree programs. The CAD Operator TCC program endows students with the prospect to continue on the career pathway toward advancement in the drafting profession. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in drafting practices and software.

Carpentry

The Carpentry Diploma program is a sequence of courses that prepares students for careers in the carpentry industry. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of carpentry theory and practical application necessary for successful employment.

Central Sterile Supply Processing Tech (Advanced)

The Central Sterile Supply Processing Technician (Advanced) TCC program is designed for individuals seeking specialized expertise in sterile supply processing, with a focus on mastering the reprocessing of complex medical instruments, including endoscopes. The curriculum offers an in-depth understanding of infection control, sterilization techniques, and industry standards critical to preventing healthcare-associated infections (HAIs).

Central Sterile Supply Processing Tech (Basic)

The Central Sterile Supply Processing Technician (Basic) TCC program is designed to equip students with the foundational knowledge and practical skills necessary to ensure the proper sterilization and distribution of medical equipment in healthcare facilities. This comprehensive program introduces students to infection control, sterilization techniques, decontamination procedures, and equipment management, emphasizing the critical role of sterile processing in maintaining patient safety.

Certified Construction Worker

The Certified Construction Worker Certificate program offers training in the construction industry providing students with the knowledge and skills they need to work effectively on a construction site. Completion of the program qualifies graduates for entry level employment. Topics include safety, tool use and safety, materials and fasteners, and construction print reading.

Cisco Network Specialist

The Cisco Network Specialist program teaches how to build, maintain and troubleshoot computer networks. Students also learn how to connect these networks to other networks and the Internet.

Civil Engineering Technology

The program will prepare students for immediate employment at the technical level in engineering design, drafting, surveying and construction. The program will provide theory and practice to move into the workforce with engineering consultants, surveying firms, state and local government, public works, construction companies, highway departments, and soil and material testing firms.

Clinic Assistant (Phlebotomy)

This certificate program provides entry level preparation for initial employment as a clinical assistant. This program provides training in the necessary skills and knowledge required to provide area health care facilities and mobile lab facilities with prospective employees. This certificate program focuses on the drawing of blood for laboratory testing.

Cnc Specialist

The CNC Specialist Technical Certificate of Credit program provides training for graduates to gain employment as CNC machine tool technicians. Topics include CNC Fundamentals, mill and lathe manual programming, CNC practical applications, and CAD/CAM programming. The program emphasizes a combination of CNC theory and practical application necessary for successful employment.

Commercial Wiring

The Commercial Wiring Technical Certificate of Credit provides instruction in the knowledge and skills necessary to perform wiring functions in a commercial setting. Topics include safety practices, blueprint and schematic reading and interpretation, and wiring procedures and practices.

Comptia A+ Certified Preparation

The CompTIA A+ Certified Technician Preparation Technical Certificate of Credit program is designed to provide computer users with the skills and knowledge necessary to take the CompTIA A+ certification exam. Earning CompTIA A+ certification shows that the individual possesses the knowledge, technical skills and customer relations skills essential for working as a successful entry-level computer service technician.

Comptia A+ Certified Technician Preparation

The CompTIA A+ Certified Technician Preparation Technical Certificate of Credit program is designed to provide computer users with the skills and knowledge necessary to take the CompTIA A+ certification exam. Earning CompTIA A+ certification shows that the individual possesses the knowledge, technical skills and customer relations skills essential for working as a successful entry-level computer service technician.

Computer Support Specialist

The Computer Information Systems - Computer Support Specialist program is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing.

Computer Support Specialist

The Computer Information Systems - Computer Support Specialist program is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing.

Cosmetology For Licensure

The Cosmetology for Licensure program is a sequence of courses that prepares students for careers in the field of cosmetology. Leaming opportunities develop professional knowledge and skills required for job acquisition, retention, and advancement.

Cyber Crime Specialist

Entry-level Computer Forensics technician.

Cybersecurity

The Computer Information Systems Cybersecurity program is a sequence of courses designed to provide students with the understanding of the concepts, principles and techniques required in computer information processing. Graduates are to be competent in the technical areas of computer terminology and concepts, program design and development, and computer networking. Program graduates are qualified for employment as Cybersecurity Specialists.

Cybersecurity

The Computer Information Systems Cybersecurity program is a sequence of courses designed to provide students with the understanding of the concepts, principles and techniques required in computer information processing. Graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, and computer networking.

Design And Media Production Specialist

The Design and Media Production Specialist TCC prepares students with basic design and media production skills, including those in vector graphics and raster imaging. Additionally, the program provides opportunities to upgrade present knowledge or skills. Graduates will receive a technical certificate of credit.

Design And Media Production Technology

Design and Media Production Technology prepares students for employment in a variety of media production industries. The program emphasizes hands on production in the following specialized areas: Computer Animation, Graphic Design and Prepress, Motion Graphics, Photography, Video Production, and Web Interface Design.

Design And Media Production Technology

Design and Media Production Technology prepares students for employment in a variety of media production industries. The program emphasizes hands on production in the following specialized areas: Computer Animation, Graphic Design and Prepress, Motion Graphics, Photography, Video Production, and Web Interface Design.

Drafters Assistant

The Drafter's Assistant certificate program will enable students to begin career laddering in the drafting profession. This certificate would provide entry level skills for graduates to work in drafting establishments or architectural firms working as assistants, aides, or runners.

Drafting Technology

The Drafting Technology diploma program prepares students for employment in a variety of positions in the drafting field. The program's occupational courses are delivered utilizing a mastery learning instructional technique that allows students to enter any semester while progressing at their own rate. Classes may meet days and evenings three semesters per year. Students receive an excellent academic foundation with core courses in English, mathematics, and psychology.

Drafting Technology

The Drafting Technology Associate of Applied Science degree program prepares students for employment in the drafting field. The program's occupational courses are delivered utilizing a mastery learning instructional technique that allows students to enter any semester while progressing at their own rate. Classes may meet days and evenings three semesters per year. Students receive an excellent academic foundation with core courses in English, algebra, geometry and trigonometry, and psychology.

Early Childhood Care And Education Basics

The Early Childhood Care and Education (ECCE) Basic TCC includes three basic Early Childhood and Care Education courses that are needed for entry level workers. The program provides an introductory course to the ECCE field, a child growth and development course, and health, safety, and nutrition course. Graduates have qualifications to be employed in early care and education settings including child care centers, Head Start, and Georgia Pre-K programs.

Early Childhood Exceptionalities

The Early Childhood Care and Education Exceptionalities Technical Certificate of Credit is a sequence of three courses designed to prepare students to work with children with special needs. The program emphasizes an inclusive classroom including strategies and activities for exceptional children (both low and high achieving students). Graduates have qualifications to be employed in early care and education settings including child care centers, Head Start, and Georgia Pre-K programs.

Early College Essentials

This Technical Certificate of Credit is designed for a cooperative agreement between technical colleges and four-year colleges/universities in the area. These students have been identified as capable of performing academically at the college level and some are disengaged at the high school and are at risk of dropping out.

Electrical Construction Technology

The Electrical Construction Technology program provides instruction in the inspection, maintenance, installation, and repair of electrical systems in the residential and commercial industries. A combination of theory and practical application is emphasized to develop academic, technical, and professional knowledge and skills. Program graduates receive a diploma in Electrical Construction Technology.

Electrical Lineworker

The Electrical Lineworker certificate program provides students with the necessary knowledge and skill to gain employment as an entry-level lineworker with electrical utility companies, both public and private. Topics include lineworker organization principles, lineworker workplace skills, lineworker automations skills, and lineworker occupational skills.

Electrical Systems Technology

The Electrical Systems Technology Diploma program provides instruction in the inspection, maintenance, installation, and repair of electrical systems in the residential, commercial, and industrial industries. A combination of theory and practical application is emphasized to develop academic, technical, and professional knowledge and skills. Program graduates receive a diploma in Electrical Systems Technology with a specialization in residential or industrial applications.

Electrical Systems Technology

The Electrical Systems Technology Degree program provides instruction in the inspection, maintenance, installation, and repair of electrical systems in the residential, commercial, and industrial industries. A combination of theory and practical application is emphasized to develop academic, technical, and professional knowledge and skills. Program graduates receive a Degree in Electrical Systems Technology with a specialization in residential or industrial applications.

Esthetician

The Cosmetic Technical Certificate of Credit is designed to offer esthetics training for entry-level students. Completion of the program prepares students to sit for the Esthetics licensure examination given by the Georgia State Board of Cosmetology and to work in a variety of professions that employ estheticians in beauty salons, spas, health clubs, cosmetics stores as well as plastic surgeons' and dermatologists' offices.

Film Production - Grip & Rigging Technician I

This program is designed to prepare entry level workers for a job as a production assistant assigned to the Grip / Rigging Department in the film and TV/video production industry, with an emphasis in the day-to- day working environment of stage production and on- location production operation.

Film Production - On-Set Production Assistant I

Film Production - On-Set Production Assistant certificate program will train competent entry-level Film/Video Production Assistants who can successfully get an entry-level job in the film / video production industry or continue with their education goals in one of the other Film Production program areas. Subject matter includes basic training in On-Set production protocols, the pre-production / production / post- production process and crew responsibilities / hierarchy.

Finish Carpenter

The Finish Carpenter progam specializes in interior and exterior finishing of residential structures. Topics include exterior finishes and trim, interior finishes and trim, and cornice and soffit. *Completed in the Certified Construction Worker technical certificate of credit program.

Framing Carpenter

The Framing Carpenter Technical Certificate of Credit prepares students for employment as framing carpenters. Program graduates are trained in the use of hand and power tools, materials, blueprint reading, and floor, wall, ceiling and roof framing. *Completed in the Certified Construction Worker technical certificate of credit program.

Gas Metal Arc Welder

This certificate program is designed to prepare students for careers in gas metal arc welding. The certificate program is composed of 15 credit hours within the Welding and Joining Technology curriculum.

Gas Tungsten Arc Welder

The Gas Tungsten Arc Welder Technical Certificate of Credit provides instruction in TIG welding techniques. Topics include understanding the nature and culture of the welding industry, oxyfuel cutting techniques, and TIG welding processes.

General Business

The Associate of Science in General Business Degree program provides an introductory foundation to core aspects of the business environment while also preparing students for continued study in the field of business. The program develops skills through course work in communication, social/behavioral sciences, natural sciences, mathematics, and the humanities, as well as in the business disciplines.

Graphic Design & Prepress Technician

The Graphic Design & Prepress Technician certificate provides students with the fundamental skills required for graphic design, image editing, and prepress production.

Hair Designer

The Hair Designer Technical Certificate of Credit is a sequence of courses that prepares students for careers in the field of hair design. Learning opportunities develop academic and professional knowledge and skills required for job acquisition, retention, and advancement.

Health Information Coding

Health Information Coding prepares students to be medical coders and billers to classify medical records according to accepted standards. The classification of diagnoses and treatments is required for Medicare and insurance reimbursement in hospitals, outpatient clinics and medical offices. The program offers training in anatomy and physiology, medical terminology, diagnostic coding, and medical procedural coding.

Health Information Management Technology

The Health Information Management Technology program is a sequence of courses designed to provide students with the technical knowledge and skills necessary to process, maintain, analyze, and report health information data according to legal,

Human Resource Management Specialist

This certificate serves as a concentrated study emphasizing the knowledge needed by human resource managers.

Industrial Electrical Technology

The Industrial Electrical Technology program is a sequence of courses designed to prepare students for careers in industry. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of theory and practical application necessary for successful employment. Program graduates receive a diploma in Industrial Electrical Technology.

Industrial Electrician

The Industrial Electrician Technical Certificate of Credit prepares students for employment using basic electrical maintenance skills. Instruction is provided in the occupational areas of industrial safety, direct and alternating current principles, and industrial wiring.

Industrial Fluid Power Technician

The Industrial Fluid Power Technician Technical Certificate of Credit prepares students to inspect, maintain, service, and repair industrial mechanical systems, fluid power systems, and pumps and piping systems. Topics include safety procedures, mechanics, fluid power, and pumps and piping system maintenance.

Industrial Wiring Technician

The Industrial Wiring Technician Technical Certificate of Credit provides basic skills for commercial and industrial wiring applications. Topics include safety procedures, direct current circuits, and wiring applications

Interdisciplinary Studies (General Education Track)

The Associate of Applied Science Degree in Interdisciplinary Studies (AIS) is designed based on each student's academic and professional goals. The AIS requires 61 semester credit hours. Areas of concentration include General Education, Marketing, and Health Sciences. The program curriculum is strategically selected to build upon the student's goals and objectives. Learning opportunities develop academic and professional knowledge and skills required for job acquisition or continued education.

Interdisciplinary Studies (Health Track)

The Associate of Applied Science Degree in Interdisciplinary Studies (AIS) is designed based on each student's academic and professional goals. The AIS requires 61 semester credit hours. Areas of concentration include General Education, Marketing, and Health Sciences. The program curriculum is strategically selected to build upon the student's goals and objectives. Learning opportunities develop academic and professional knowledge and skills required for job acquisition or continued education.

Interdisciplinary Studies (Marketing Track)

The Associate of Applied Science Degree in Interdisciplinary Studies (AIS) is designed based on each student's academic and professional goals. The AIS requires 61 semester credit hours. Areas of concentration include General Education, Marketing, and Health Sciences. The program curriculum is strategically selected to build upon the student's goals and objectives. Learning opportunities develop academic and professional knowledge and skills required for job acquisition or continued education.

iOS App Development in Swift

The iOS App Development With Swift TCC includes occupational and specialized courses designed to allow programming and web development majors to augment their existing programs with iOS Development with iOS application development concepts. In addition, this will allow professional programmers and web developers the ability to add iOS App Development with Swift to their skill set.

Land, Forest, Wildlife Management

The Land, Forest, Wildlife Management Assistant program is a sequence of courses designed to prepare students for careers as employees at land management services and plantations. General education, basic science and program-specific learning opportunities develop the knowledge and skills required for job acquisition, retention, and advancement.

Land, Forest, Wildlife Management

The Land, Forest, Wildlife Management Technology program is a sequence of courses designed to prepare students for careers as employees at public and private wildlife preserves & plantations and as Conservation Rangers (Game Wardens). General education, basic science and program-specific learning opportunities develop the knowledge and skills required for job acquisition, retention, and advancement.

Land, Forest, Wildlife Management Specialist

The Land, Forest, Wildlife Management Specialist program is a sequence of courses designed to prepare students for careers as employees at public and private wildlife preserves & plantations. General education, basic science and program-specific learning opportunities develop the knowledge and skills required for job acquisition, retention, and advancement.

Lathe Operator

The Lathe Operator certificate program prepares students to use lathes, lathe set up, and lathe tool grinding. Emphasis is placed on cutting threads, boring holes to precise measurements, and cutting tapers. Topics include an introduction to machine tool technology, blueprint reading for machine tool, and basic and advanced lathe operations.

Lawn Equipment/Small Engine Repair

This program introduces students to the fundamentals of lawn equipment and small engine repair. Students completing this program will be prepared for entry level employment in the professional lawn care, golf course maintenance, landscaping, and small engine repair industries.

Management And Leadership Specialist

This certificate serves as an expanded overview in the field of management.

Manufacturing Engineering Technology

The Manufacturing Engineering Technology Diploma is course of study prepares students to use basic engineering principles and technical skills in developing and testing automated, servo mechanical, and other electromechanical systems.

Manufacturing Engineering Technology

The Manufacturing Engineering Technology Associate of Applied Science course of study prepares students to use basic engineering principles and technical skills in developing and testing automated, servo mechanical, and other electromechanical systems. This degree program will include instruction in prototype testing, manufacturing and operational testing, systems analysis and maintenance procedures.

Manufacturing Engineering Technology Assistant I

The Manufacturing Engineering Technology Assistant I course of study prepares students to use basic engineering principles and technical skills in developing and testing automated, servo mechanical, and other electromechanical systems. This certificate will provide high school students with a pathway to pursue an Associate of Applied Science Degree in Manufacturing Engineering Technology and/or a Diploma in Manufacturing Engineering Technology.

Manufacturing Engineering Technology Assistant II

The Manufacturing Engineering Technology Assistant II course of study prepares students to use basic engineering principles and technical skills in manufacturing processes, automated manufacturing, programmable logic controllers, and other automated manufacturing tools. This certificate will provide high school students with a pathway to pursue an Associate of Applied Science Degree in Manufacturing Engineering Technology and/or a Diploma in Manufacturing Engineering Technology.

Manufacturing Maintenance Specialist

The Manufacturing Maintenance Specialist Technical Certificate of Credit program provides instruction to prepare students for employment in a variety of positions within the industrial production equipment maintenance field. The program provides learning opportunities that introduce, develop, and reinforce academic and technical knowledge, skills, and attitudes required for job acquisition, retention, and advancement.

Marketing Management

The Marketing Management Diploma program is designed to prepare students for employment in a variety of positions in today's marketing and management fields. The Marketing Management program provides learning opportunities that introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement.

Marketing Management

The Marketing Management Associate of Applied Science Degree program is designed to prepare students for employment in a variety of positions in today's marketing and management fields. The Marketing Management program provides learning opportunities that introduce, develop and reinforce academic and occupational knowledge, skills and attitudes required for job acquisition, retention and advancement.

Master Barber

The Barbering program is a sequence of courses that prepares students for careers in the field of barbering. Learning opportunities develop academic and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes specialized training in safety, sanitation, hair treatments and manipulations, haircutting techniques, shaving, skin care, reception, sales, and management.

Medical Billing Clerk

The Medical Billing Clerk program provides instruction in medical insurance and medical billing for reimbursement purposes.

Medical Front Office Assistant

The Medical Front Office Assistant Technical Certificate of Creditis designed to provide the educational opportunities to individuals that will enable them to obtain the knowledge and skills necessary to secure an entry level position as a receptionist in a physician's office, hospital, clinic, or other related areas. Technical courses apply to the degree or diploma program in office technology.

Microsoft Network Administrator

The Microsoft Network Administrator Technical Certificate of Credit provides training in Microsoft networking. This certificate will prepare the student for an entry-level computer networking position. Skills taught include implementation of Microsoft operating systems, implementation of Microsoft servers, and networking Infrastructure. This certificate prepares the student to sit for the Microsoft Certified IP Professional (MCITP) networking exam.

Microsoft Word Application Professional

#

Mill Operator

The Mill Operator certificate program teaches students to effectively operate milling machinery. Students become proficient in blueprint reading, general mathematical operations, and are provided the necessary knowledge and skills to obtain employment as a milling machinist.

Motorcycle Maintenance Technician

The Motorcycle Maintenance Technician certificate program is a single semester sequence of courses that prepares students to obtain entry level maintenance positions in the power sports service industry. The program emphasizes a combination of mechanical theory and practical experience relative to the maintenance of power sports equipment. Topics include shop safety, basic electrical theory, wheels and tires, precision measuring, valve adjustments, and battery service.

Motorcycle Service Technology

The Motorcycle Service Technology diploma program is a sequence of courses that prepares students for positions in the motorcycle and ATV repair industry. The program emphasizes a combination of mechanical theory and practical experience. This program includes courses in motorcycle engines, chassis systems, electrical systems, fuel systems, and includes an internship experience.

Networking Specialist

The Computer Information Systems - Networking Specialist program is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, and computer networking.

Networking Specialist

The Computer Information Systems - Networking Specialist program is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, and computer networking.

Network Technician

The Network Technician Technical Certificate of Credit provides basic training in computer information systems networking. Students are introduced to the basic concepts of network administration. Upon graduation, students will be able to install, configure, and maintain networks using Windows networking software.

Office Accounting Specialist

The Office Accounting Specialist Technical Certificate of Credit provides entry-level office accounting skills. Topics include principles of accounting, computerized accounting and basic computer skills.

Operations Management Specialist

This program prepares individuals to manage and direct the physical and/or technical functions of a firm or organization, particularly those relating to development, production, and manufacturing.

Payroll Accounting Specialist

The Payroll Accounting Specialist Technical Certificate of Credit provides entry-level skills in payroll accounting. Topics include: principles of accounting, computerized accounting, principles of payroll accounting, mathematics, and basic computer use.

Pc Repair And Network Technician

The PC Repair and Network Technician certificate prepares the student with the skills needed to perform personal computer troubleshooting and repair.

Precision Machining And Manufacturing

The Precision Machining and Manufacturing Diploma program is a sequence of courses that prepares students for careers in the machine tool technology field. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of machine tool theory and practical application necessary for successful employment.

Precision Machining And Manufacturing

The Precision Machining and Manufacturing Technology Degree program is a sequence of courses that prepares students for careers in the machine tool technology field. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of machine tool theory and practical application necessary for successful employment.

Programmable Control Technician

The Programmable Controller Technician Technical Certificate of Credit offers specialized training in programmable controllers. Topics include motor control fundamentals, and instruction in basic and advanced PLCs.

Residential Wiring Technician

The Residential Wiring Technical Certificate of Credit prepares students for employment in the construction industry as qualified residential wiring technicians. Topics include NEC regulations, blueprint reading, principles of direct and alternating current, and residential wiring procedures and practices.

Salon And Spa Support Specialist

The Shampoo Technician Technical Certificate of Credit introduces courses that prepare students for careers in the field of Cosmetology as Shampoo Technicians. Learning opportunities develop academic and professional knowledge required for job acquisition, retention and advancement.

Small Business Management Specialist

This program prepares individuals to manage and direct the physical and/or technical functions of a firm or organization, particularly those relating to development, production, and manufacturing.

Small Business Marketing Manager

The Small Business Marketing Manager Technical Certificate of Credit prepares individuals to develop and manage independent small businesses. Included are courses in marketing, management, selling, promotion, and business regulations.

Submerged Arc Welder Operator

The submerged Arc welding Operator will work in the areas of the welding industry where welds with high deposition rates and maximum penetration will be needed on thick sections of low and medium carbon steels, as well as stainless and some nickel steels.

Supervisor/Management Specialist

This certificate serves as an introduction to the basics of supervision and/or management.

Technical Management Specialist

This certificate is designed to allow integration of management knowledge and other areas of technical training.

Technical Specialist

The purpose of this certificate is to prepare students for positions in business that require technical proficiency to translate technical information to various audiences and in various formats using written and oral communication skills.

Vertical Shielded Metal Arc Welder Fabricator

The Vertical Shielded Metal Arc Welding Fabricator technical certificate of credit prepares students for careers in shielded metal arc welding fabrication.

Welding And Joining Technology

The Welding and Joining Technology diploma is designed to prepare students for careers in the welding industry. Program learning opportunities develop academic, technical, professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes welding theory and practical application necessary for successful employment.